Taylor Base Demand Reagent #6 2oz - R0006C — Discounter's Pool & Spa Warehouse Skip to content
The unprecedented global pandemic conditions have impacted our suppliers’ manufacturing productivity and timelines, as a result, some orders may be delayed. Furthermore, our carriers have indicated they are also experiencing delays. As a result, your order may take longer than usual to be delivered. We thank you for your patience during this time.
The unprecedented global pandemic conditions have impacted our suppliers’ manufacturing productivity and timelines, as a result, some orders may be delayed. Furthermore, our carriers have indicated they are also experiencing delays. As a result, your order may take longer than usual to be delivered. We thank you for your patience during this time.

Taylor BDR Reagent #6 2oz - R0006C

$20.10
SKU 10002886

Taylor Base Demand Reagent (BDR) #6 is used to measure the amount of alkali material required to raise pH to a predetermined level. This can be accomplished by use of a base titration procedure, referred to as a Base Demand Test.

REAGENT SHELF LIFE
All reagents have a shelf life, whether they are liquids, powders, crystals, tablets, or test-strip pads. If kept dry, powders and crystals are very stable; acids are also long lived. Date of manufacture is not the controlling factor when it comes to shelf life—storage conditions are more important.

As with all perishables, reagents are sensitive to environmental influences and will last longer under controlled conditions.

To this end, we recommend:

  • Storing reagents at a consistent temperature in the range of 36°-85° F (2°-29° C); extreme temperature fluctuation, say from a refrigerator to a hot car trunk, causes reagents to deteriorate.
  • Keeping them out of prolonged direct sunlight. (Note: their brown plastic bottles help protect very light-sensitive reagents.)
  • Segregating reagents from containers of treatment chemicals.
  • Replacing caps immediately and tightening them carefully so that exposure to air and humidity is limited.
  • Avoiding switching bottle caps, placing bottle caps on soiled surfaces, repouring reagents into contaminated containers, or touching test strip pads.

Taylor formulates its reagents to remain effective for at least one year, with only very few exceptions (molybdenum indicator in liquid form is one; after four months old it should be tested against a standard periodically).

As a general precaution, replace all reagents more than one year old, or at the beginning of a new testing season.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)