HPI Outdoor Rink Liner
- 12 Mil Thickness
- Heat Welded Seams
- Solid White Top/Radient Silver Underside
Locate a flat area within your property for which you will designate for the ice rink. The Ground must be as level as possible and clear of obstructions (roots, rocks, etc). If the ground is not level you can do so by making a sub floor for the low spots, or grade out the low spots.
Decide which materials will be used for the construction of the ice rink (wooden boards, 2″x8″‘s, pvc piping, etc). Stake out the surface to where you envision the ice rink to go. Good aids to be used are stake chalk, a garden hose, string, etc. Begin laying out the materials used for the boards and begin fabricating the boards together.
Install the liner. Make sure that the silver side is down (facing the ground). Also be sure that the cover is as flat as you can get it, to prevent wrinkles. The cover should be taught in the inside corner. When this is done it is time to secure the liner to the boards via nails, staples, etc.
Begin filling the liner with water, let freeze and enjoy your skating time.